| California Robotics and Automation https://calrobot.com Thu, 20 Oct 2022 14:36:02 +0000 en-US hourly 1 https://calrobot.com/wp-content/uploads/2022/02/cropped-SiteIcon2022-32x32.jpg | California Robotics and Automation https://calrobot.com 32 32 AS Language Manual for E Controller https://calrobot.com/download/as-language-manual-for-e-controller/ https://calrobot.com/download/as-language-manual-for-e-controller/#respond Thu, 20 Oct 2022 14:26:48 +0000 http://calrobot.com/?post_type=wpdmpro&p=5228

If you are planning on programming the robot using your laptop, this is the manual of all commands. If you have a copy of an AS Language program, you can use this to explain it.

]]> 0 Kawasaki KRTerm for accessing the robot terminal https://calrobot.com/download/kawasaki-krterm-for-accessing-the-robot-terminal/ https://calrobot.com/download/kawasaki-krterm-for-accessing-the-robot-terminal/#respond Thu, 20 Oct 2022 14:24:35 +0000 http://calrobot.com/?post_type=wpdmpro&p=5227

This is the way we access the robot programming interface. This program is IP based and similar to HyperTerm

]]> 0 Kawasaki Robot Operation Manual https://calrobot.com/download/kawasaki-robot-operation-manual/ https://calrobot.com/download/kawasaki-robot-operation-manual/#respond Thu, 20 Oct 2022 14:19:05 +0000 http://calrobot.com/?post_type=wpdmpro&p=5224

This manual explains how the Teach Pendant works

]]> 0 Kawasaki Robot Spin Control https://calrobot.com/download/kawasaki-robot-spin-control/ https://calrobot.com/download/kawasaki-robot-spin-control/#respond Sat, 01 Aug 2020 17:36:30 +0000 http://calrobot.com/?post_type=wpdmpro&p=2880 Kawasaki Robotics Spin Control Function has two control systems. Their differences are listed in the table below.
1. Simple Spin Control: Expands the motion range of JT6 or the external rotation axis set as the spin axis, and synchronizes movement of the spin axis with the other axes (JT1 – JT5) towards the set point. In short, expands the normal motion range for a robot’s JT6 or external rotation axis.

2. Standard Spin Control: Functions the same as Simple Spin Control but without synchronizing movement of the spin axis with the other axes (JT1 – JT5). Uses special commands/instructions for spin control in operation.

Spin Control is more often used in welding robots but can also be used as a safeguard to keep palletizing robots from tearing up the harness on the 4th axis.

]]> 0 Kawasaki Robotics duAro – Dual Scara Robot https://calrobot.com/download/kriduaro/ https://calrobot.com/download/kriduaro/#respond Sat, 13 Apr 2019 14:55:49 +0000 http://calrobot.com/?post_type=wpdmpro&p=1415 The Kawasaki duAro Dual Scara Robot

]]> 0